Westermann WR870 Replacement / Spare Wire Brush

EASY CHANGE

Simply tip the machine onto its end, and rest it on its handle bars. This will position the brush vertically allowing you to change the brush. Undo the 6 clamp bolts using a spanner, remove the existing brush and then position the replacement. It is easiest to affix the upper brush clamp first, allowing gravity to do its work. Position the clamps loosely whilst you get it into position, then tighten in a criss-cross pattern to secure the brush evenly.
A brush change will take approximately 5 minutes.

BRUSH LIFE

Brush will last for approximately 3,000-5,000m2

WHICH MODEL

Suitable only for the Honda engine models. Do not use with the Battery models.