Designed by Evopower. Powered by Cummins. Controlled by Deep Sea Electronics.
The Evopower UKC110ECO is powered by a Cummins 6BT5.9-G2 engine, for standby use it has a maximum power of 110kVA or 88kW, it is also a prime or constant power unit that offers 100kVA 80kW. Standby (ESP) and Prime Power (PPR) ratings are defined within ISO8528. Using a high-quality LK274C brushless alternator is self-excited and includes an AVR (automatic voltage regulator) to prevent voltage drop due to increased loads
Coming with a heavy-duty weatherproof canopy enclosure that is rustproof, powder-coated, and fitted with quality sound attenuation. The noise level is only 70 dB at a 7-meter distance. There are also stainless steel fittings are used for all door hinges and locks.
Designed in the UK, using Evopower’s vast experience building power equipment. All of the ECO series generators are much more than an engine and alternator, using high-quality components in all of their gensets such as DSE (Deep Sea Electronics) control panels, Varta batteries, CHiNT 4 pole MCCB breakers, industrial-grade silencers, Cummins engines also Genpower custom alternator.
The Evopower UKC110ECO 110kVA Cummins powered diesel generator has an integral base mounted fuel tank which holds 227 liters of diesel and you can also use red diesel to reduce cost. You will get 9.6 hrs runtime at 100% load, 20 hrs at 50% (based on prime power rating). The fuel cap is lockable and filters are in an easy-access place within the canopy. This unit is sup[plied with a bunded fuel tank.
Mounted on a heavy-duty skid with forklift slots, also comes with easy unloading/moving and hook eyes to help keep the machine stable while transporting or lifting into position. The Evopower ECO range offer as a standard both a battery charger and cooler heater as standard.
Powered by Cummins 6BT5.9-G2 Industrial engine.
The Evopower UKC110ECO generator is powered by a well-known and world-class Cummins engine that is turbocharged, charge air-cooled, and has an intercooler. It runs at 1500RPM to prolong lifespan and maintain 50Hz.
The Cummins 6BT5.9-G2 diesel engine has 6-cylinders and is a 5.9-liter direct injection that uses high-quality components throughout the build like Fleetwood filters & BYC fuel pumps & injectors. Using 16.4 litres of SAE 15W/40 as engine oil is what is recommend and also using a 50/50 mix for the coolant/radiator fluid of 50% water and 50% ethylene glycol (anti-freeze).
Unlike more traditional mechanical governors that can’t be adjusted the Evopower features an electronic governor that regulates the fuel being pumped into the engine, it can adjust the fuel intake quickly as the load is applied to keep the rpm steady at 1500RPM and at 50hz, this, in turn, to help prevent any damage to sensitive electronic equipment you may have.
Controlled by the DSE 6120 MKIII control panel.
The entire Evopower ECO range of diesel generators uses a Deep Sea Electronics 6120 MKIII control panel. Deep-Sea Electronics (DSE). Going back to 1975 DSE has been making generator control panels, auto transfer switches, and battery chargers so you know you are in good hands when DSE is featured within your generator. The DSE6120 control panel in this genset is manufactured within the UK. With an easy-to-read LED display and ATS compatibility as standard meaning that this generator can start/stop automatically once connected to the ATS panel. This gives you peace of mind that in an emergency situation you will not be without power for more than a minute or so. We advise when looking at generators as a backup power solution an ATS panel (automatic transfer switch), it connects to the consumer unit the property, and the generator, it constantly looks for power coming from the grid, once it knows the power from the grid has gone it will turn the generator on. The starting and stopping of the generator will take around 1min. Once power from the grid is restored it turns the generator off back to standby mode. If you need help with an ATS panel please get in touch.
The DSE control panel has a built-in USB port, you can program and customise the parameters and modules via a PC once you have downloaded the relevant software from Deep Sea Electronics website. This can also be done directly from the control panel itself via buttons.
The control panel has many built-in features and will notify you with alerts such as.
- low oil pressure - which can lead to a lack of lubrication and engine damage,
- high water temperature - which could be a sign that the radiator airflow is blocked or the water level is low.
- high or low voltage detected - which could signify a problem with the alternator, AVR, or degrading electrical connections and lead to your equipment being damaged.
- High or low frequency or engine over/underspeed - which could signify an issue with the fuel regulation/governor and leads to unstable frequency output.
- There are also built-in features such as start/stop issues and more.
Standard features
- Engine (DCEC Cummins)
- Radiator 50oC Max, engine driven fan
- 24V charge alternator
- Main Alternator: Single bearing alternator IP23,
- insulation class H/H
- Deep-Sea standard auto control system
- 1 set of air filter, fuel filters & oil filters included
- Mainline circuit breaker/MCCB by CHNT
- Base mounted fuel tank
- Twin Varta batteries
- Low noise exhaust system with rain flap
-
User manual
Evopower Generator
- Prime Power: 100kVA / 80kW
- Standby Power: 110kVA / 88kW
- Voltage Line To Line: 400V
- Current Per Phase (Prime): 144A
- Current Per Phase (Standby): 159A
- Sound Level: 70dB @7m
Engine – DCEC Cummins
- Model: 6BTA5.9-G2
- Aspiration: Turbocharged
- Fuel System: AD Type
- No. Cylinders: 6
- Displacement: 5.9L
- Bore*Stroke: 102*120mm
- Compression Ratio: 17.5
- Rated Speed: 1500RPM
- Net Power - prime: 86kW
- Governor Type: Electrical
- Starter Motor: 24V
Dep Sea Controller
Model: DSE6120
Protection Functions
- Low oil pressure
- High water temp
- High/low voltage
- High engine temp and engine speed
- Voltage regulator frequency regulator
- Emergency stop
- Start failure
Alternator
- Model: Genpower LK274C
- Phase: 3
- Voltage: 400/230V
- Wiring Type:3-Phses 4-Wire, Y Type
- Bearing: 1
- Power Factor: .8
- Frequency: 50Hz
- Exciter Type: Brushless, Self-Excitation
- Voltage Regulation: ARV
- Protection Grade: ±0.5%
- Insulation Grade: IP23
Exhaust System
- Exhaust gas flow: 16.8m3/min
- Exhaust temp: 565c
- Max back pressure: 10kPa
Fuel System
- 100% Load (Prime Power): 23.6L/h
- 75% Load (Prie Power): 16.9L/h
- 50% Load (Prime Power):11.3L/h
- Fuel Tank Capacity 227 Ltrs
- Bunded fuel tany
Lubrication System
- Oil capacity: 16.4 Ltrs
- Oil pressure: 345kPa
Cooling System
- Thermostat operational range: 82-95 c
- Max water temp: 100c
Options
- Engine coolant heater
- Alternator heater
- Water oil separator
- 3-Way fuel valves for remote fuel tank
- Remote control panel
- ATS ( Automatic Transfer Switch)
- Paralleling for multiple sets
Please contact us if any of these options are of interest to you for pricing & lead-time.
Warranty Info
- Genpower Alternator: 3-Years from date of purchase or 3000 hours
- Cummins Engine: 1-Year for prime power usage or 2000 hours, 2-Years for standby use or 500 hours per year. Full engine service intervals to be adhered to.
- General generator components: 1-Year
The limited warranty terms differ depending upon the model and the location of the generator.
For UK based installations, the Cummins powered ECO range have a warranty up to 24 months / 1,000 hours for standby applications or up to 12 months / 2,000 hours for prime applications. The alternator fitted to our UKC110ECO range carries a 3 Year warranty.
In order to activate your extended warranty terms on the Cummins ECO range you must complete a few steps. For standby applications, if you have used your genset less than 500 hours in year 1, send us the service records and proof of hours in month 13 from purchase and we will extend your warranty for 12 months / 500 hours (max of 24 months, 1,000 hours).
For Prime applications, servicing and maintenance is key to prevent downtime. To extend the warranty from 1,000 hours to 2,000 hours send Evopower a picture of the hours clock, and proof of servicing works within 14 days of each service to receive a warranty that lasts 2,000 hours. Please read the full warranty document to ensure you make the most of your free warranty.
All warranties are subject to terms and general wear and tear or serviceable parts, and any failure due to lack of maintenance in line with guidelines are not covered. Please contact us if you require any more detailed information on any of the warranty terms.
Documents
Service Info
The full-service schedule can be found within the Cummins manual sent with your Genset. The general guide is to change the lubricant/engine oil every 250 hours or 6 months.
This unit holds 16.4 Litres of lubricant/oil and we recommend using SAE 15W40 engine oil.
For quick reference, we recommend using Fleetguard replacement filters. The relevant filter part numbers for the Cummins 6BT5.9-G2 engine, used in the UKC110ECO, UKC110ECO-LR, UKC125ECO and the UKC125ECO-LR generators are:
- Fuel filter(s): FF5052, FS1280
- Oil filter(s): LF3349
- Air filter(s): KW2140
- Coolant filter(s): WF2073
We also offer replacement sensors, belts, starter motors and alternators for our Evopower ECO range all powered by Cummins. Get in touch if you need any advice or guidance over spare parts for your generator.
Delivery
These are supplied as Ex Works, this means you must arrange the collection from our warehouse. We can arrange the delivery for you if need, please get in touch with us with the delivery address and postcode for a quote on this, we will deliver at our cost on these units.
