Designed to enable one man to knock any size stake, peg or post into the ground, up to a 4” diameter. The high impact hammer action of 1720 BPM will drive a post into the ground in a matter of seconds, with the power pack being the ultra-reliable & compact Honda GX35T 4-Stroke Engine.
This model is not suitable for installing Marquee Pins - For a Marquee Pin Machine please click here
Benefits
- Portable – No pipes and generators needed
- Lightweight, only 15.3kg
- Ideal for Steep ground and inaccessible locations
- Physically less demanding than traditional methods
- Can be used all day without operator fatigue
Applications
- Any shape from 10mm – 100mm Ø
- Fencing – Timber and Angle Iron Posts
- Landscaping – Tree Stakes
- Nurseries – Tree and plant support
- Vineyards – Especially steep hillsides
- Farming – Sheep and cattle fencing
- Construction – Temporary fencing/shuttering/ground pinning
- Contractors – Tent Stakes/Ground Anchors/Signage
- Festival/Fair Organisers – Signage/Temporary fencing
What is included?
- Easy Petrol Post Driver A Multi Adapter, size of your choice (sizes below)
- Tough Box and 1 litre Fuel Can.
- Instruction & Servicing Manual
- 6mm & 3mm Hex Key
- 5ml Loctite
- 50ml Crank Grease
Please select when ordering what size adaptor kit you would like sent with it, sizes below.
Sizes of adaptor kits that can be supplied with the unit.
MULTI-UK-A; 107mm / 95mm / 78mm
MULTI-UK-B; 107mm / 78mm / 52mm
MULTI-UK-C; 107mm / 85mm / 56mm (Clipex)
MULTI-EURO-A; 107mm / 95mm / 85mm
MULTI-EURO-B; 107mm / 85mm / 75mm
MULTI-EURO-C; 107mm / 85mm / 65mm
Best Results
Get the best results from your Easy Petrol Post Driver by using an adapter with the closest fit to your post sizes. Adapters are available for the Easy Petrol Post Driver in all shapes & sizes within 107mm round diameter. Custom sizes are available, please contact us for more information
What is the maximum capacity?
The maximum capacity of the machine is 4” round diameter.
Our largest adapter is 107mm internal diameter.
When the ground is very dry, compacted or stoney, you will need to make a pilot hole for posts larger than 78mm. This can be either by hand using a Pilot-Bar, or mechanically using either a pilot holer tool or a mechanical earth auger. Posts smaller than 78mm should not need a pilot hole. Ground conditions of Clay or Chalk may also require this method.
What adapters do I need?
To get the most effective use from the Post Driver, the Adapter size must be a snug fit for your Posts. We recommend the Adapter must be no more than 5mm larger than your Post. For shaped posts; squares / t-shapes etc the outer corners need to be within this capacity.
If you are unsure what adapter is right for you, please contact us for advice specific to your application.
Warranty
Manufactured in Australia, complete with a 3-Year Commercial Machine Warranty as standard (1 year on the engine), with all spares held in stock in the UK so maintaining the machine is easy for years to come.
Powered by a 4-stroke Honda engine
Powered by an ultra-reliable Honda GX35 4-Stroke Engine which can operate 1,720 blows per minute. A 1-year engine warranty is included.
Lightweight
Weighing just 15.3kg, the Easy Petrol Post Driver has been designed to allow one man to knock any size post, peg or stake into the ground up to a 4” diameter.
Portable
For those jobs that the tractor post knocker isn’t quite suitable for. Our machine is built to allow you to knock in posts in almost any inaccessible location, on steep banks and across uneven ground.
Applications & Typical Post Driver Clients
- Post sizes from 10mm – 100mm Diameter Ø
- Fencing for Timber, Metal and Angle Iron Posts
- Landscaping for Tree Stakes
- Nurseries for tree and plant support
- Vineyards – Especially steep hillsides
- Farming for sheep and cattle fencing
- Contractors – Tent Stakes, Ground Anchors, Signage and much more
- Festival and Fair Organisers – Signage and Temporary fencing
Single adaptors
Easy Post Driver 1” Square Adapter 32x32mm
Easy Post Driver 2” Square Adapter 52x52mm
Easy Post Driver 3” Square Adapter 80x80mm
Easy Post Driver 4” Round Adaptor Suitable for posts between 90mm – 100mm diameter
Easy Post Driver 4” x 2” Rectangle Adapter 115mm x 60mm Suitable For Half Round 4” Posts + Rectangle
Easy Post Driver Angle Iron Adapter 52 x 52 x 8mm
Easy Post Driver Custom Adapters: Price On Application
Take a look at some of the features
