Armour-Seal is the premium grade in Air-Seal Products tyre sealant range. It is capable of an instant puncture repair up to 30mm in diameter, within one or two revolutions across heavier ply tyres. This grade offers double the performance capabilities when compared to all other tyre sealants on the market worldwide.
This tyre sealant has been proven in hazardous conditions by military forces around the world and performs equally well in other extreme locations such as quarries, mines, docks, and major construction sites.
Costly downtime for both driver and machine can be avoided with just one application of our Armour-Seal tyre sealant. The financial implications and inconvenience related to tyre replacement and the use of specialist tyre repair services is also greatly reduced
- Increase tyre life by up to 20%
- See the table below for a quantities needed for your car or device. 33 units per 4 litre bottle.
- Prevent up to 95% of all tread punctures in tubeless tyres and can be used in tubed tyres
- Armour-Seal seals holes up to 30mm
- Stops most rim and bead leaks and slow punctures permanently
- Reduce fuel costs by maintaining correct tyre pressures
Why it Works
Fibres
Fibres constitute the backbone of the tyre sealant. The stronger the fibres, the greater the protection for the tyre. The strongest fibres are state-of-the-art synthetic fibres such as those used in tyre cord and bullet proof vests. The more varied the fibres in both length and degree of branching, the faster the seal forms and the more permanent the repair. By using the appropriate grade, these sealants will meet the design specifictions for all types of tyre and the working onditions where they are used.
Fillers
Once a strong plug is formed by the fibres, the final seal is provided by filler particles which lodge between the fibres to form an effective airtight plug. The use of these inorganic fillers is imperative for a high performance sealant.
Quantiy Required Per Tyre
One unit = 30ml, 20 litre pail = 666 Units - One full press of the pump = 1 unit.
| Item Type | Units Needed (Per Wheel) |
|---|
| Ride-on Mower |
Front 16 Units / Rear 32 Units |
| Wheelbarrow |
16 Units |
| Trailer / Caravan |
16 Units |
| ATV / Quad |
32 Units |
| Car |
8 Units |
| SUV (4x4) |
12 Units |
| 4x4 |
16 Units |
| Bicycle |
4 Units |
Tyres that spin fast (car) rahter than slowly (mower or wheelbarrow) require less sealant as there is more centrifugal force to spread the sealant around evenly.
Suspension Stability
The function of the liquid in the sealant is the medium by which the fibres and fillers reach the area of the puncture in the tyre. Our products contain anti-corrosive inhibitors which will prevent any damage to the rim or tyre.
The Premier Tyre Sealant
We are confident that our unrivalled technology is superior to any other tyre sealant. Our sealants are now fully proven to be an integral part of all good tyre management programmes.
Increase profitability by up to 20% and Reduce CO2 Emissions,
Less call outs for punctures and increased tyre life not only increase your profitability but are good for the environment as well! Tyre pressures are maintained so you also save on fuel costs.
Reduce Operational Costs and Downtime
You will also significantly reduce costly downtime for idle machines and labour. Using our tyre sealants will reduce your operating and tyre replacement costs.
As the tyre rotates, the product spreads evenly over the inside surface. Immediately a puncture occurs, the air pressure in the tyre forces millions of fibre particles and fillers suspended in the sealant to interlock to form a plug which prevents any further air loss. This action will be completed within two or three revolutions of the wheel. This is a mechanical process not a chemical reaction. It happens so fast that the driver may not know a puncture has happened. Later, when the tyre is inspected, if the nail or the cause of the puncture is still there it can be removed.
Technical Information
- Reduce your C02 emissions
- Will not prevent conventional tyre repair or re-treading
- Indefinite shelf-life and can be re-used
- Easy to install and is not a gum based product
- Non-Hazardous
- Can be used on tyre pressures from 2.5psi upwards Freezing point -35°C
- Also avialbe in 20 litre pails with installation pump and operating manual or one litre bottles
- COSHH information available.
