This Cummins® commercial silenced / enclosed generator set is a fully integrated power generation system, providing optimum performance, reliability, and versatility for Stationary Standby and Prime Power Duty applications. It can output 55kVA / 44kW of backup / standby power or 50kVA / 40kW of prime power.
- Standby Power: 55kVA / 44kW
- Prime Power: 50kVA / 40kW
- Engine Speed: 1500rpm
- 380-415V, 3 Phase, Wye, 4 Wire outputs
- 180 litre fuel tank single wall with spillage containment
- Fuel lasts up to 15 hours at 100% load
- Canopy Noise Level: 76 dB(A) at 1m
- Warranty: 2 year 500 hour standby / 1 year unlimited hours prime
Cummins heavy-duty engine
Rugged Cummins 4BTAA3.3-G14 4-cycle industrial diesel delivers reliable power and fast response to load changes.
Alternator
UCI22 4D (Stamford) low reactance 2/3 pitch windings; low waveform distortion with non-linear loads, fault clearing short-circuits capability and class H insulation.
Cooling system
Standard integral set-mounted radiator system, designed and tested for rated ambient temperatures, simplifies facility design requirements for rejected heat.
Control system
The PowerCommand® electronic control is standard equipment and provides total genset system integration, including auto remote start/stop, alarm and status message display.
Warranty and service
Standby, 2 Years, 500 Hours, Prime 1 year unlimited hours. Comprehensive Base Warranty. Backed by a worldwide distributor network.
Fuel Consumption
|
Standby |
Prime |
Ratings |
55kVA / 44kW |
50kVA / 40kW |
Load |
1/4 |
1/2 |
3/4 |
Full |
1/4 |
1/2 |
3/4 |
Full |
L/hr |
4 |
7.2 |
10.2 |
13.2 |
3.8 |
6.4 |
9.4 |
12 |
Engine
Engine manufacturer |
Cummins |
Engine model |
4BTAA3.3G14 |
Configuration |
Inline 4-Cylinder diesel |
Aspiration |
Turbocharged and after-cooled |
|
Standby rating |
Prime rating |
Gross engine power output |
62.6 kWm |
58 kWm |
BMEP at set rated load |
1538 kPa |
1428 kPa |
Bore |
95 mm |
Stroke |
115 mm |
Rated speed |
1500 rpm |
Piston speed |
5.75 m/s |
Compression ratio |
19:1 |
Lube oil capacity |
8 litre |
Overspeed limit |
1650 rpm |
Regenerative power |
N/A |
Governor type |
Mechanical |
Starting voltage |
12 Volts DC |
Alternator
Connection 1: |
Wye, 3 phase |
Temp rise |
163/125 C |
Duty2: |
S/P |
Alternator |
Stamford: UCI224D |
Voltage |
380-415v |
Weight
Unit dry weight * |
922 kg |
Unit wet weight * |
1010 kg |
* Weights represent a set with standard features
Dimensions
Dimensions |
Length |
Width |
Height |
Enclosed set standard dimensions |
2270 mm |
975 mm |
1920 mm |