Pacer S Series Self-Priming Centrifugal Pumps are chemically resistant for general water service, waste treatment, salt water and many industrial chemicals. Moulded from tough glass reinforced thermoplastics, polyester and or polypropylene to resist corrosion and chemical attack. These pumps feature, as standard, type 316 Stainless Steel internal hardware and carbon-ceramic self-lubricating mechanical shaft seals. All pumps include a built-in check valve and double flush volute to keep pumps free of settled solids and are fitted as standard with type 304 stainless steel clips and fasteners.
- 4 Bar max pressure
- 40m max head
- 757 Lpm max flow
- Self-priming (after initial priming)
- Yanmar L48V engine
- Polyester body, BUNA seals
- Medium carry frame with anti-vibration rubbers
- 2" female pump inlet
- 2" female pump outlet
- Carbon ceramic mechanical seal
- Polyester 706 impeller
- With port couplings & suction filter
- Dimensions - 576mm x 520mm x 476mm
- Weight: 25kg
Hoses and Accessories
This unit does not come with hoses included. You will need a suitable length of 2 inch suction hose to pull water from source into the pump, and 2 inch layflat hose of suitable length to transport your water to its intended destination. Various lengths of hose, clamps and hose connection kits are available here: